By 
Whether you’re an experienced plumber, just getting started as a climate control system technician, or planning to install a small aircon in your home, you will need the tools designed for air conditioning units.
Aircon refrigeration tools are required for preventive maintenance for domestic and commercial aircon systems and refrigerator, freezer, and aircon repairs.
Essential Aircon Tools
Leak Detection Tools
Aircon units and refrigerators depend on a refrigerant to cool and function correctly. It is essential to ensure the refrigerant is not leaking or seeping out. To detect leaking issues, we offer several reliable refrigerant leak detector tools and accessories to identify leaks before too much damage is done.
Manifolds and Hoses
Air conditioning installations work by changing the state of a cooling agent as it flows between an evaporator and a condenser. The cooling agent circulates, driven by the refrigerating compressor. A gauge manifold is a refrigeration tool used to check the unit’s pressure. If there is too much or too little pressure, the system won’t work correctly or could break down completely. Manifolds are one of the most basic HVAC tools to diagnose issues or check if the pressure is correct during an aircon service.
All aircon systems need a hose and charging line these are basic spare parts and available for leading aircon models.
Measuring Equipment
HVAC measuring devices are needed to measure the temperature and pressure of different sections of an aircon system. A thermometer with a temperature range suitable for measuring the section, including the liquid line, suction line, and air discharge, is among the essential tools a technician should carry.
Nitrogen Equipment
Over time, oxidisation inevitably occurs in all air conditioning units, and the system will become contaminated. It is important to regularly clean an air conditioning system to ensure that the filtered air that the machine sends out is pure and healthy. For this job, a technician will use nitrogen.
Nitrogen is a popular choice because it does not damage the environment, unlike other gases used in the past.
Recovery Equipment
Refrigerant recovery devices are used to remove refrigerants from cooling appliances. Technicians need to drain the refrigerant before carrying out a repair or routine maintenance on aircon units, freezers, or fridges. The refrigerant is collected into a tank to be later recycled or reused.
Thermometers
While a thermometer is not the most interesting aircon tool, it’s an essential accessory for an aircon technician. When it comes to HVAC systems, temperature control is vital, especially in commercial settings where a fluctuation of as little as 1°C could represent a considerable change in how the equipment works. Storing food, for example, at the wrong temperature could mean you are not compliant with laws.
Aircon thermometers are mainly used to measure copper lines’ air, refrigerant, and temperature, as these measurements are essential to locate a possible defect.
Tube Working Tools
Tube tools are instruments needed to service tubing in HVAC or industrial heating and temperature control. Standard tube working tools required for aircon maintenance include flaring tools, pipe benders, soldering tools, and pipe cutters.
Vacuum Pumps
An aircon vacuum pump removes unnecessary air and vapour from an air conditioning unit during a service. Once this is done and the refrigerant is removed, a technician can perform a complete test on the system.
Comments