If you’re looking for a complete guide to plumbing, you’re in the right place! From maintenance to clogs and everything in between, this article has all the information you need to make sure your plumbing system is working properly.
Dos and don’ts
For some, the thought of performing a plumbing task at home is downright daunting. However, it is more than possible for the average do-it-yourselfer with the right tools and information. Fortunately, there are a handful of reputable plumbing organizations in town. They are a good source of advice, and can certify a newbie as a licensed plumber. These folks can help you tackle those pesky leaky toilets and malfunctioning sinks. If you’ve ever experienced a dripping faucet, you know just how much frustration it can cause.
Whether you’re fixing a leaky toilet or installing a whole house water filter, it pays to know what you’re doing. If you’re not up on your plumbing lingo, you might be causing more damage than you’re fixing. So make sure you read the manual. The best way to do this is to be proactive. A simple checklist will ensure you don’t go under the sink to fix something you should have left on the counter.
Depending on what you’re doing, it’s not uncommon to see some serious damage to your wallet when it comes to repairing your plumbing. If you’re on the hook, you might as well do it right the first time. Taking proper precautions will ensure you won’t have to go through a second round of repairs. This is especially true if you have access to a well-stocked tool box. After all, who wants to shell out a ton of money to have an expert come and repair their leaky pipes?
For the most part, this arduous task can be tackled with a bit of common sense, a little creativity, and a little luck. Performing a plumbing task at home can be fun and rewarding. Taking a few minutes out of your day to do it right the first time will save you money in the long run.
Clogs
One of the more common plumbing complaints is a slow draining sink. A good guess is that you have a clog in the p-trap, or a small clog somewhere in the pipeline. If you have no clue what to do next, call a pro. A clog is not a fun endeavor, but it is not impossible to fix. Luckily, you can avoid the pain by following the steps outlined below.
First, you need to know what a clog is. In order to get to the root of the problem, you’ll need to find out which part of the pipe is causing the trouble in the first place. The best way to do this is to use a plumber’s snake, or better yet, a plumber’s snake that can be installed in the pipe. This is the most effective and safest method, but it may require a trip to the hardware store.
Next, you’ll need to decide what type of cleaning method you want to employ. You can opt for an open ended squirt, which will likely require less work, or a more hands on approach, like a plunger or plumber’s snake. If you’re on a budget, you can try a hose, which is the cheapest option. This also comes with the drawbacks of having a drippy faucet, so be careful not to overfill it. To prevent this from happening, you should always clean out the squirt every so often. Likewise, a squirt should never be the only way to flush something down a sink. Lastly, you’ll need to have your clog cleared before you can turn the water back on. The most important thing is to have a reputable contractor perform the necessary maintenance, and to keep a cool head.
Maintenance
Plumbing is one of the most important parts of a home. Whether you need to keep your water lines free of blockages or you’re trying to prevent mold growth, the correct maintenance practices can help you avoid problems. But before you dive into the do-it-yourself repairs, you should know some basics about plumbing. This will help you better understand the issues and how to deal with them.
The first thing you should do when a leak is noticed is shut off the main supply of water. Then, check all the drains in your house for any signs of blockage. If you notice any signs of damage, call a plumber North Charlotte right away. Otherwise, you might just be stuck with a bigger problem.
Comments